Products by KIN-TEK Analytical, Inc

The KIN-TEK Analytical FlexStream™ System is ideally suited for creating trace concentration – ppm, ppb, and pptr – mixtures. The FlexStream™ uses KIN-TEK Trace Source™ disposable, refillable and diffusion permeation tubes for over 550 Supported Chemicals. Permeation tube oven with wide temperature...

KIN-TEK manufacturers permeation tubes in two basic types – disposable and refillable – for over 550 chemicals. Disposable Tubes Disposable Permeation tubes are tubular devices about the size of a pencil with liquid component compound sealed inside. The component compound slowly permeates through...

KIN-TEK manufacturers permeation tubes in two basic types – disposable and refillable – for over 550 chemicals. Refillable Tubes Refillable Permeation tubes generally offer a broader range of concentration than disposable tubes. They are often recommended for long-term service and for...

KIN-TEK Industrial Gas Standard Generators are used in industrial environments. These instrument systems use Trace Source™ permeation tubes to deliver calibration gas standards directly to your process GC, GC-MS, or any type of gas analyzer. KIN-TEK Gas Standard Generators provide the temperature...

The Span Pac™ H2O Trace Moisture Gas Standard Generator provides: H2O concentrations adjustable over 20:1 range with single oven; 400:1 with dual oven system; 10,000:1 with secondary dilution mass flow. Concentrations within 0.01 to 10,000 ppm H2O range depending on model selection. H2O...

The Model CO395Flex™ Certification Oven is a stand alone version of the permeation tube oven used in the KIN-TEK 491Flex™, Modular Gas Standards Generating System. Permeation tubes require several hours for the emission rate to stabilize after a temperature change. This can be a challenge if the...

The KIN-TEK Analytical 491Flex™ System is a manually operated, expandable, full capability permeation tube system for generating precision calibration gas mixtures. The 491Flex™ is ideally suited for creating trace concentration – ppm, ppb, and pptr – mixtures. The system uses KIN-TEK Trace...

The EcoFlex™ Permeation System is designed for creating trace concentration gas mixtures. Mixtures are produced by diluting the minuscule flow of vapor emitted by Trace Source™ permeation (or diffusion) tubes with a much larger flow of inert matrix gas, typically nitrogen or zero air. Mixtures...