Abresist Kalenborn Corp.

Rating: 0 - Write A Review
5541 North State Road 13, PO Box 38
Urbana, IN 46990-0038
About Abresist Kalenborn Corp.
  • Basalt wear-resistant linings from Abresist Corporation, Urbana, IN, provide protection for all types of hydraulic and pneumatic conveying lines. The linings were especially effective in preventing abrasion in a cyclone used in the cement industry. Since the time of Archimedes screw elevators have been used for pumping water. Solids entrained by wastewater are a heavy burden for screw conveyors and troughs. The abrasion increases the annular gap until the conveying capacity of the screw conveyor reaches almost zero. The installation of Abresist basalt lining prevented the abrasion.
    Abresist basalt linings accommodate the bending typical of long conveying screws. During installation corrugated wire mesh is fastened to the steel surface to provide reliable attachment to the cyclone. In installations where temperatures reach above approximately 250C/482 F the use of potassium silicate based mortar for installation is required.
    Abresist basalt linings are used in hydraulic and pneumatic conveying lines, like bottom and fly ash. The wear-resistant linings handle many types of abrasive products, including coal, cement, sand and harsh, granular chemicals among others. Abresist basalt linings eliminate the need for repairs, maintenance and downtime, resulting in longer service life.
Competitors of Abresist Kalenborn Corp.
  • DLM Plastics

    We are flexible membrane fabricators applying both technology and experience to produce liners for a variety of applications such as lagoons, stormwater control chamber systems, retention and detention ponds, recreational ponds, cisterns, tanks, silos, breather bags and other types of secondary...
  • Carboline Co

    Carboline offers a comprehensive line of zinc primers, epoxy anticorrosives, high performance topcoats, IMO-approved ballast tank linings, and antifoulings that will provide service for up to 60 months. Our high-temperature coatings, interior primers and finishes, surface-tolerant coatings, and...
  • CDF Corp

    CDF Corporation is a privately held flexible packaging company that leads the U.S. market in liners for industrial containers and custom packaging solutions. Since its inception in 1971, the company has maintained an energetic entrepreneurial approach to industrial packaging design,...
Products by Abresist Kalenborn Corp.
  • Keraflex Wear Protection Systems

    Abresist Kalenborn Corporation offers 2 KERAFLEX wear protection systems, consisting of ALRESIST® high alumina ceramics or KALMETALL®W hard overlay welding plates vulcanized to a steel base. These systems are well suited where high abrasion and impact occur in combination. Maximum... Read more
  • Kalpoxy Wear Compound

    KALPOXY is a highly wear resistant epoxy bonded hard compound with over 70% solids, used as a jointless lining for structural components and repairs. Prematurely worn system components can be repaired rapidly and easily with minimum downtime. KALPOXY features a short curing time, completely... Read more
  • Kalflex® Flexible Piping System

    KALFLEX® flexible and wear resistant pipe system provides a cost-effective solution to connect structural components that move due to vibration, thermal expansion, or as a result of intended movement. Simple and quick to install, KALFLEX can easily be integrated into existing pipe systems... Read more