K2 Portable CCTV Inspection Series
Condition Assessment of 6” – 200” Sanitary & Storm Sewers! Versatility, durability, and reliable performance! The K2 portable inspection system can be mounted in a wide range of vehicles, trailers, or used as a stand-alone system. K2 features wireless control of all camera, transporter, and reel... Read more »
Kalflex® Flexible Piping System
KALFLEX® flexible and wear resistant pipe system provides a cost-effective solution to connect structural components that move due to vibration, thermal expansion, or as a result of intended movement. Simple and quick to install, KALFLEX can easily be integrated into existing pipe systems using... Read more »
Kalpoxy Wear Compound
KALPOXY is a highly wear resistant epoxy bonded hard compound with over 70% solids, used as a jointless lining for structural components and repairs. Prematurely worn system components can be repaired rapidly and easily with minimum downtime. KALPOXY features a short curing time, completely... Read more »
KAMX nozzle
【Features】 Prevention of dust adhesion by reducing large droplets in the spray periphery even at a low air-water volume ratio(air-water volume ratio: 100). Light weight and compact design. Spray angle capacity from 40 to 80 degrees. 【Applications】 Gas cooling 【Material】 Principal parts: SUS316L Read more »
Keraflex Wear Protection Systems
Abresist Kalenborn Corporation offers 2 KERAFLEX wear protection systems, consisting of ALRESIST® high alumina ceramics or KALMETALL®W hard overlay welding plates vulcanized to a steel base. These systems are well suited where high abrasion and impact occur in combination. Maximum operating... Read more »
Key Fire ECO-10
Key Fire ECO - 10 is a lightweight double jacket rubber-lined attack hose. Features: Made in the U.S.A. 100% synthetic all polyester double jacket 100% mildew resistant Thin wall high tensile EPDM rubber liner UL Listed Double dip Key-Lok process available 25% stronger jacket 25% lighter Special... Read more »
KIN-TEK Trace Source™ Disposable Permeation Tubes
KIN-TEK manufacturers permeation tubes in two basic types – disposable and refillable – for over 550 chemicals. Disposable Tubes Disposable Permeation tubes are tubular devices about the size of a pencil with liquid component compound sealed inside. The component compound slowly permeates through... Read more »
KIN-TEK Trace Source™ Refillable Permeation Tubes
KIN-TEK manufacturers permeation tubes in two basic types – disposable and refillable – for over 550 chemicals. Refillable Tubes Refillable Permeation tubes generally offer a broader range of concentration than disposable tubes. They are often recommended for long-term service and for... Read more »
Komline-Sanderson Plunger Pump
K-S Plunger Pumps are engineered for heavy duty service in difficult sludge, slurry, float transfer, or metering applications. It is a self-priming positive displacement pump that can pass solid objects up to 1-5/8" in diameter, rags, or entrained air. Our pumps have capacities to 34 liters per... Read more »
Koroseal Linings
GOAD COMPANY’s Koroseal Linings with N-FUZE® Technology (U.S. Pat. No.’s 8,133,345 & 9,278,478) leads the Koroseal Lining industry since 2006. By eliminating hand welds, and the risk associated with them, GOAD COMPANY has overcome the past problems associated with Koroseal Linings. GOAD COMPANY... Read more »
Kovar Iron Nickel Alloy Coil and Strip
Kovar, also know as ASTM F-15, NILO K, Pernifer 2918, Rodar, and Dilvar P1, is a Nickel Iron controlled expansion alloy with 29% Nickel, 17% Cobalt and the remaining balance Iron. Kovar expansion characteristics match both borosilicate (or Pyrex) glasses and alumina ceramics making it one of the... Read more »
Kovar Iron Nickel Alloy Plate
Kovar, also know as ASTM F-15, NILO K, Pernifer 2918, Rodar, and Dilvar P1, is a Nickel Iron controlled expansion alloy with 29% Nickel, 17% Cobalt and the remaining balance Iron. Kovar expansion characteristics match both borosilicate (or Pyrex) glasses and alumina ceramics making it one of the... Read more »
Kovar Iron Nickel Alloy Rod and Bar
Kovar, also know as ASTM F-15, NILO K, Pernifer 2918, Rodar, and Dilvar P1, is a Nickel Iron controlled expansion alloy with 29% Nickel, 17% Cobalt and the remaining balance Iron. Kovar expansion characteristics match both borosilicate (or Pyrex) glasses and alumina ceramics making it one of the... Read more »
Kovar Iron Nickel Alloy Sheet
Kovar, also know as ASTM F-15, NILO K, Pernifer 2918, Rodar, and Dilvar P1, is a Nickel Iron controlled expansion alloy with 29% Nickel, 17% Cobalt and the remaining balance Iron. Kovar expansion characteristics match both borosilicate (or Pyrex) glasses and alumina ceramics making it one of the... Read more »
Krynit 582
KRYNIT 582 High-performance protection for intricate handling in oily environnement. HDPE cut resistant liner, which combines dexterity and protection against mechanical hazards. Polyurethane coating provides maximum grip in oily or wet applications and fully coated design protects entire hand... Read more »
Krystol Internal Membrane™ (KIM®)
Krystol Internal Membrane (KIM) is a hydrophilic crystalline admixture used to create permanently waterproof concrete. KIM lowers the permeability of concrete, and is used in place of surface applied waterproofing membranes. By stopping the transmission of water through concrete, KIM adds... Read more »
Krystol Plug™ - Krystol Leak Repair System
As part of the Krystol Leak Repair System, Krystol Plug is a rapid-setting hydraulic cement product that when mixed with water is used to stop flowing water and repair leaking cracks, holes and joints in concrete. Krystol Plug sets hard within 2 minutes and has high-compressive strength, which... Read more »
Krystol T1® Concrete Waterproofing
Krystol T1 is a surface applied crystalline slurry treatment that transforms new or existing concrete into a permanent waterproofing barrier. Krystol T1 lowers the permeability of the concrete to protect against the ingress of water and waterborne chemicals. Since it becomes integral to the... Read more »
Krystol Waterstop Treatment™
Krystol Waterstop Treatment is a cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion. Krystol Waterstop Treatment is used in conjunction with Krystol Waterstop Grout and/or... Read more »
K-S Biosolids Dryer System For Biosolids And Biological Sludge Drying
The Komline-Sanderson Biosolids Drying System uses indirect drying technology to convert municipal and industrial biological sludge into a pasteurized, free flowing granular product. The dried biosolids can be beneficially reused as a slow release nitrogen fertilizer, soil amendment additive or as... Read more »
K-S Paddle Dryer / Processor
The Komline-Sanderson Paddle Dryer / Processors are highly efficient, mechanically agitated, indirect heat transfer devices that add or remove heat from a process mass. They are used for drying, heating, cooling, pasteurization, crystallizing, and reacting of pastes, cakes, powders, and... Read more »
K-S Paddle Dryer For Sludge And By-Products Drying
The K-S Paddle Dryer is used worldwide for drying a variety of sludges and by-products, generating dry stable products reducing disposal cost and converting waste into marketable by-products. Drying also allows some wastes to be used as fuel. Dual counter rotating shafts with unique intermeshing... Read more »
Kynar PVDF Tanks, Linings & Liners
Kynar PVDF Tanks, Linings & Liners are the best solution for difficult, highly corrosive, high temperature applications. Kynar® PVDF box liners are easy to install, require minimal or no tank preparation, can be installed over existing linings without removal, and are offered with extended... Read more »